How do I connect my labeling panels to the DS|Manage360 site?

If you are using DS|Manage360 then you can connect the labeling panels in DS|Design to DS|Manage360, but first you will need to ensure DS|Design is up to date by checking for updates using the below Checking for Updates instructions, if there are no updates for DS|Design, please follow the Steps to Connect DS|Design’s Softscape & Design Labeling Panel to DS|Manage360.

  • Checking for Updates:
    • In Windows 10
      • Click Windows Logo in bottom left corner
      • All Apps
      • Scroll down and click on DynaSCAPE
      • Click on Check for DynaSCAPE Design Updates and follow the prompts
    • In Windows 8.1
      • Click Windows logo in bottom left corner
      • Scroll down and click on arrow in bottom left
      • Scroll over to DynaSCAPE
      • Click on Check for DynaSCAPE Design Updates and follow the prompts
    • In Windows XP, Vista, 7:
      • Check for updates by going to Start > (All) Programs > DynaSCAPE > Design > Check for DynaSCAPE Design Updates
  • After your updates are complete, check for updates again to ensure it states “There are no updates available for DynaSCAPE Design at this time”
  • Once the software is up to date, continue with the below steps to connect the labeling panels to DS|Manage360

Steps to Connect DS|Design’s Softscape Labeling Panel to DS|Manage360:

  1. Open DS|Design
  2. Go to the Softscape labeling panel
  3. Click on Settings
  4. Under “My Plants location” area, ensure Manage Website option is selected then click Change:
    • Enter the website url ie. http://MySiteName.dynascapemanage.com
      Note: Do not enter https:// use http://
    • Enter the  Manage User Id (username)
    • Enter the Manage Password in the first and second area
  5. Click OK

Steps to Connect the DS|Design’s Design Labeling Panel to DS|Manage360:

  1. Open DS|Design
  2. Go to the Design labeling panel
  3. Click on Settings
  4. Select Use Estimating Labels
  5. Under Design Label Linking, ensure Online option is selected then click Change:
    • Enter the website url ie. http://MySiteName.dynascapemanage.com
      Note: Do not enter https:// use http://
    • Enter the Manage User Id (username)
    • Enter the Manage Password in the first and second area
  6. Click OK
in DS|DesignDS|Design How to?