If you are using DS|Manage360 then you can connect the labeling panels in DS|Design to DS|Manage360, but first you will need to ensure DS|Design is up to date by checking for updates using the below Checking for Updates instructions, if there are no updates for DS|Design, please follow the Steps to Connect DS|Design’s Softscape & Design Labeling Panel to DS|Manage360.
- Checking for Updates:
- In Windows 10
- Click Windows Logo in bottom left corner
- All Apps
- Scroll down and click on DynaScape
- Click on Check for DynaScape Design Updates and follow the prompts
- In Windows 8.1
- Click Windows logo in bottom left corner
- Scroll down and click on arrow in bottom left
- Scroll over to DynaScape
- Click on Check for DynaScape Design Updates and follow the prompts
- In Windows XP, Vista, 7:
- Check for updates by going to Start > (All) Programs > DynaScape > Design > Check for DynaScape Design Updates
- Check for updates by going to Start > (All) Programs > DynaScape > Design > Check for DynaScape Design Updates
- In Windows 10
- After your updates are complete, check for updates again to ensure it states “There are no updates available for DynaScape Design at this time”
- Once the software is up to date, continue with the below steps to connect the labeling panels to DS|Manage360
Steps to Connect DS|Design’s Softscape Labeling Panel to DS|Manage360:
- Open DS|Design
- Go to the Softscape labeling panel
- Click on Settings
- Under “My Plants location” area, ensure Manage Website option is selected then click Change:
- Enter the website url ie. http://MySiteName.dynascapemanage.com
Note: Do not enter https:// use http:// - Enter the Manage User Id (username)
- Enter the Manage Password in the first and second area
- Enter the website url ie. http://MySiteName.dynascapemanage.com
- Click OK
Steps to Connect the DS|Design’s Design Labeling Panel to DS|Manage360:
- Open DS|Design
- Go to the Design labeling panel
- Click on Settings
- Select Use Estimating Labels
- Under Design Label Linking, ensure Online option is selected then click Change:
- Enter the website url ie. http://MySiteName.dynascapemanage.com
Note: Do not enter https:// use http:// - Enter the Manage User Id (username)
- Enter the Manage Password in the first and second area
- Enter the website url ie. http://MySiteName.dynascapemanage.com
- Click OK